For people with a site or maybe an application, speed is very important. The speedier your site works and then the faster your web apps perform, the better for everyone. Given that a web site is just a set of files that communicate with one another, the devices that keep and access these data files play an important role in website operation.

Hard drives, or HDDs, were, until recent times, the most efficient devices for keeping information. Having said that, lately solid–state drives, or SSDs, have already been rising in popularity. Have a look at our assessment chart to find out if HDDs or SSDs are more suitable for you.

1. Access Time

With the arrival of SSD drives, file accessibility speeds have gone through the roof. Because of the brand–new electronic interfaces utilised in SSD drives, the average data file access time has shrunk into a all–time low of 0.1millisecond.

HDD drives continue to makes use of the exact same general file access technique which was originally created in the 1950s. Despite the fact that it has been significantly enhanced consequently, it’s sluggish compared with what SSDs are providing. HDD drives’ data access speed varies somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

Resulting from the unique radical data file storage technique embraced by SSDs, they give you quicker data access speeds and quicker random I/O performance.

Throughout our trials, all SSDs demonstrated their capacity to deal with at the least 6000 IO’s per second.

Having an HDD drive, the I/O performance progressively enhances the more you employ the disk drive. Even so, once it gets to a certain limit, it can’t go faster. And due to the now–old concept, that I/O cap is much lower than what you might find having an SSD.

HDD can only go so far as 400 IO’s per second.

3. Reliability

SSD drives are made to include as fewer moving elements as feasible. They utilize a similar technology like the one found in flash drives and are generally more reliable compared to conventional HDD drives.

SSDs provide an typical failing rate of 0.5%.

HDD drives employ rotating hard disks for keeping and browsing data – a technology dating back to the 1950s. And with disks magnetically suspended in the air, spinning at 7200 rpm, the odds of one thing failing are generally increased.

The standard rate of failure of HDD drives varies between 2% and 5%.

4. Energy Conservation

SSD drives work practically noiselessly; they don’t produce excess warmth; they don’t mandate extra cooling down alternatives and consume way less electricity.

Tests have indicated the common electric power use of an SSD drive is somewhere between 2 and 5 watts.

HDD drives are renowned for staying noisy. They need extra electricity for cooling down purposes. Within a web server which has a large number of HDDs running at all times, you need a great number of fans to make sure they’re cooler – this will make them far less energy–effective than SSD drives.

HDDs take in between 6 and 15 watts.

5. CPU Power

SSD drives provide for a lot quicker data file accessibility rates, which will, in return, permit the CPU to perform file requests faster and after that to go back to different tasks.

The standard I/O wait for SSD drives is exactly 1%.

HDD drives support slower accessibility rates as opposed to SSDs do, resulting for the CPU being forced to hold out, while saving allocations for your HDD to locate and return the inquired data.

The average I/O delay for HDD drives is approximately 7%.

6.Input/Output Request Times

In the real world, SSDs operate as wonderfully as they performed during CharlotteWebs’s trials. We produced a complete system data backup on one of our own production machines. Over the backup procedure, the average service time for any I/O calls was in fact below 20 ms.

Sticking with the same web server, however, this time loaded with HDDs, the effects were different. The normal service time for an I/O request changed between 400 and 500 ms.

7. Backup Rates

Referring to back–ups and SSDs – we’ve discovered a fantastic development in the back–up speed since we switched to SSDs. Right now, a common web server data backup can take solely 6 hours.

In contrast, on a server with HDD drives, a similar back up might take 3 to 4 times as long to finish. A full back up of any HDD–powered web server typically takes 20 to 24 hours.

If you want to promptly improve the overall overall performance of your respective web sites and not having to change any code, an SSD–operated website hosting service will be a great solution. Examine the cloud hosting – our services highlight swift SSD drives and are available at the best prices.

  • Service guarantees

  • Join us today. There are no configuration rates and you’ll have full root/administrator access to your server. 99.9% network availability is guaranteed.
  • Compare our prices

  • Check out our rates and choose the best Virtual Private Server for your dynamic websites. You’ll be able to move up to a more powerful VPS Hosting plan with only a click.
  • Compare our hosting plans
  • Contact Us

  • We’re on duty for you 24/7 to resolve any questions concerning our VPS Hosting platform. 1–hour reply time frame guarantee.